Mojave MA-201fetVG, Large Diaphragm Solid State Condenser

The MA-201fet is a large diaphragm, phantom-powered, solid-state condenser microphone with a fixed cardioid pattern. With its roots in a lineage of microphone designs by David Royer, the MA-201fet gives warm, full-bodied reproductions of vocals and instruments, with none of the shrillness and high frequency distortion artifacts that are often encountered with modern condenser microphones.

Utilizing a 3-micron gold-sputtered capsule, high-quality Jensen audio transformer, military-grade FET and custom designed low-noise resistors, the MA-20fet performs at a level reminiscent of some of the best loved classic condenser microphones. Each MA-201fet microphone is carefully tested and evaluated, then packaged in its protective case with a professional grade shock mount.

Features:

1. Hand-selected 3-micron 1 ″ capsule
   Jensen audio transformer
   Military-grade FAT
   Custom designed low-noise resistors
   Ultra clean signal path
   Recommended Applications:
2. Vocals
   Voice Over and Broadcast
   High SPL sources, such as Kick Drums and Bass Guitar Amps
   electric guitar
   Piano
   Drum Overheads, Drum Rooms
   Acoustic Instruments
   TECHNICAL DATA
   TRANSDUCER TYPE: Externally polarized pressure gradient capacitor
   DIAPHRAGM: 1-inch diameter, gold sputtered
   DIAPHRAGM THICKNESS: 3-micron
   POLAR PATTERN: Cardioid
   FREQUENCY RESPONSE: 20 Hz-20kHz, +/- 3dB
   SENSITIVITY: -39 dB re. 1V / pa
   MAX SPL: 125 dB
   DISTORTION: <1% @ 120dB SPL, <3% @ 134dB SPL
   SELF NOISE: 14dB nominal, not to exceed 16dB (A weighted)
   IMPEDANCE: 550 ohms, transformer balanced (Jensen)
   POWER: 48VDC phantom power; current .68mA.
   DIMENSIONS AND WEIGHT:
   Carrying case with microphone, shock mount: 10 ″ x 9 ″ x 4.5., 4 lbs.
   Microphone: 7 5/8 ″ x 2 ″, 1 lb.