SD-1 is Universal Audio's dynamic microphone for recording and live use. It is equipped with cardioid polar characteristics, low cut filter and articulation boost switch and Apollo Channel Strip for well-sounding and professional sound.
UA SD-1 Microphone
Capture your best, every time.
With SD-1 Standard Dynamic Microphone you can record vocals, instruments, livestreams and podcasts in professional quality and broadcast-ready.
Advantage
- Record close-mic vocals and instruments with a classic dynamic carded microphone
- Open and present sound with low-cut and articulation boost switches.
- Adjust your vocals or instruments with the included SD-1 Apollo Channelstrip presets.
Professional vocals, Anywhere
SD-1 gives you professional studio-standard recordings, no matter where they are made. It is tailored for close-mic speech and vocal recordings. With its simple dynamic design, it repels background noise such as air conditioners, refrigerators and noisy band members.
Adjust your sound with Quick Controls
Reduce the rumble and deep unwanted frequencies with the built-in Low-cut filter and with its extended articulation boost you will very quickly be able to create a vocal or instrument recording with the correct presence.
Sound like the pros with Apollo Channelstrip presets
Get to the desired sound faster with the included Apollo Custom SD-1 microphone presets - with the radio-clear EQ and compression settings for vocals, guitar and broadcast.
Expand your studio setup
With the compact modern design and rear-facing XLR connector for smart cabling, the SD-1 will fit into any studio setup. Whether it's music, podcast, live streaming or a zoom meeting, your new go-to studio microphone has arrived.
Your best recordings to date.
SD-1 comes with a built-in shock mount and pop filter which makes your recordings free of noise and will automatically sound clear without outside noise and air.
Micron Type |
Dynamic |
Polar Pattern |
Cardioid |
Frequency response |
50 Hz – 16 kHz |
Sensitivity |
-58 dB (1.3 mV) ref 1V at 1 Pa, 1 kHz |
Output Impedance |
200 Ohms |
Recommended Load Impedance |
> 1 K Ohms |
Adjustable control |
Low Cut Filter (200Hz): Off, On |
Plug: |
3-Pin XLRM |
Accessories included |
⅝ ”to ⅜” Thread Adapter |
dimensions |
7.68 ″ (195 mm) length, 2.36 ″ (60 mm) diameter |
vægt |
1.6lbs (735g) |