Sonarworks Sound ID Reference f Speakers and Headphones w. Microphone

Sonarworks SoundID is the most advanced acoustics convolution-based equalizer system designed for calibrating monitors. Sonarworks removes unwanted staining from studio monitors and headphones so that they perform at their absolute best, and you achieve a clarity and precision that is not otherwise possible. Here in the large version for both speakers and headphones and included measuring microphone.

A speaker and headphone calibration software delivering consistently accurate studio reference sound.

In less than 20 minutes you can calibrate your existing studio speakers with a SoundID Reference measurement microphone and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets. With an applied calibration profile the software sets the frequency response target to be completely flat across all audible frequencies so you can make music that sounds great everywhere. You can also now make custom adjustments to the target curve in real time with the new custom target feature.

With accurate studio reference sound, you can seamlessly switch between speakers, headphones, and rooms. Finally, ensure continuity of your workflow regardless of distance, your gear or set-up.

Key features

• Speaker calibration: save as many profiles as needed
• Headphone calibration profiles for 280+ supported models
• Custom target: target curve adjustments in real-time
• Translation Check: simulating 20+ different devices and device types for accurate mix translation results everywhere without leaving the workstation
• 3 filter modes: Zero Latency, Mixed and Linear Phase
• Additional DSP processing controls: Mono, Dry / Wet, and Safe Headroom
• MIDI mapping in the SoundID Reference app for various controls
• User Presets in the SoundID Reference app for switching quickly between predefined output device / channel pair combinations

What's included

• SoundID Reference app for Speakers & Headphones
• SoundID Reference DAW plugin (AU, VST, AAX) for Headphones
• Averaged profiles for 280+ supported headphone models
• SoundID Reference Measurement Microphone with individual calibration profile
• Activation key for the product license: the product can be activated and used on 3 machines

System Requirements

• Mac: macOS 10.12 or later
• PC: Windows 8 (64-bit) or later
• Sonarworks supported or Sonarworks individually calibrated headphones
• 2.0 or 2.1 stereo speaker system
• An audio interface featuring + 48v Phantom Power and 44.1 kHz sample rate capability
• Audio hardware setup must consist of a single external hardware device only during the speaker measurement process
• XLR to XLR audio cable
• Stable internet connection
• IMPORTANT! Compatibility with Apple M1 chip machines not guaranteed - read full support statement here

Microphone specification

• House's pre-polarized electret-condenser capsule
• Frequency response: 20 Hz - 20kHz with supplied calibration profile
• Omnidirectional polar pattern
• Sensitivity is rated at -37dB / Pa (14 mV)
• Self-noise: 24 dB
• S / N ratio: 70 dB
• Dynamic range: 106dB
• Maximum SPL: 132 dB SPL